Fine Instruments And Calibration

The pendulum Impact Tester is designed for conducting Izod and  Charpy Test. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.

It is read on digital readout in case of electronic machines

Accuracy conform to IS:3766-2003, IS:1598-1977, IS:1757-1999, IS:1499-2003, BS:131-Part- I, II, III, IV & BSEN-10045-1993 (ISO 148-2) for Charpy.

ASTM Impact Tester is designed for conducting Charpy Test. The Pendulum is mounted on antifriction bearings.  On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.

Accuracy conform to ASTM E23-16

•Loading accuracy as high as + 1%.
•Straining at variable speeds to suit a wide range of materials.
•Printer & PC graphs enable study the behavior of the materials.
•Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of test specimen.
•Simplicity in reading because of digital readouts.
•Wide range of standard and special accessories, including load stabilizer.
•Easy change from plain to threaded and screwed specimens.
•Large effective clearance between columns enables testing of standard specimens as well as structures.
•Simple controls for easy of operation.
•Robust straining frame of an extremely rigid construction.
•Safe operation ensured be means of safety devices.
•Fully enclosed and protected pressure transducer.
•RS 232 serial port to transfer data to computer for analysis/storage evaluation etc. Manual control & release valve operation.

•Loading accuracy as high as + 1%.
•Straining at variable speeds to suit a wide range of materials.
•Printer & PC graphs enable study the behavior of the materials.
•Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of test specimen.
•Simplicity in reading because of digital readouts.
•Wide range of standard and special accessories, including load stabilizer.
•Easy change from plain to threaded and screwed specimens.
•Large effective clearance between columns enables testing of standard specimens as well as structures.
•Simple controls for easy of operation.
•Robust straining frame of an extremely rigid construction.
•Safe operation ensured be means of safety devices.
•Fully enclosed and protected pressure transducer.
•RS 232 serial port to transfer data to computer for analysis/storage evaluation etc. Manual control & release valve operation.

•Loading Accuracy as high as + 1 % •Various Models - Capacities from 1000 KN to 2000 KN are available. •Manual control & release valve operation. Simplicity in reading because of digital readouts. •Wide range of standard and special accessories, including load stabilizer,  load rate, strain rate control, Simple controls for easy of operation. •Robust straining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. •Fully enclosed and protected pressure transducer. •RS 232 serial port to transfer data to computer for analysis/ Storage evaluation etc. (optional)